S. K. Overseas

We are engaged in offering YK-8000C Multi Parameter Patient Monitor to our clients. Our range of all products is widely appreciated by our clients.

Details:

• 12.1" color TFT LCD screen with multi channel waveforms display
• Rechargeable high energy built in Li Battery
• Easy to learn,easy to use,simplified menus and delicated functions keys
• Easy connectiong with central monitoring system
• 96 hours data storage
• Suitable for adult, pediatrics and neonates
• Monitors end-tidal CO2 and inspired CO2 accuracy at high respiration rates
• Gas monitoring wirh cutting edge water filter tube

Details:

• 12.1” Colour TFT LCD display with waveforms upto $ Channels
• Portable, streamline handle design
• Monitor measures from Adult to Neonates
• Graphic and tabular Trend for 96 hours for all parameters
• Multi Screen format
• Audible and Visual alarms with adjustable alarm ranges
• Powertul data management and storage capacity
• Manual or Automatic NIBP measuring with 500 unit memory
• Rechargeable battery backup

ECG:

• 5-lead or 12-lead selectable
• Input: 5-lead: RA; LA; RL; LL; V or R; L; N; F; C
• Lead selection: I; II; TI; ayR; avL; avF; Vx; CAL
• Gain selection:*0.25,*0.5,*1,*2,auto
• Sweep speed: 12.45mm/s, 25mm/s, 5Omm/s
• Accuracy: +1bpm or +1%, whichever is greater
• Protection; Withstand 4000V AC/SOHz voltage in isolation against electrosurgical and defibrillation
• Calibration signal: ImVi5%
• Operation modes: Diagnostic, Monitor, Surgery
• Heart rate range: Adult: 15-300bpm Paediainic
• Neonatal: 15- 350bpm
• Measurement range: -2.0mV~2Z.0mV
• S-T detection: YES, Arrhythmia analysis: YES
• Alarm: YES, audible and visual alarm, alarm events recallable

NIBP:

• Method: Oscillometry
• Operation modes: Manual/Automatic/STAT
• Measurement unit: mmHg/KPa selectable
• Measurement types: Systolic, Diastolic, Mean
• Measurement range: Adult: 10-270mmHg
• Over-pressure protection: YES
• Resolution: 1mmHg
• Accuracy: The mean error shall be less than +5 mmHg, the standard deviation shall be less than +8mmHg
• Alarm: Systolic, Diastolic, Mean

Aqua-8 Multi Parameter Patient Monitor is our newest product. The display is 8 inch high resolution color TFT.
Features:

• 8 inch high resolution color screen.
• Exquisite design suitable to moving operation.
• Operation interface: Standar, Trend Screen, oxyCRG Screen, NIBP List, Big font Screen.
• Freeze instant waveform for real time S-T segment analysis, pace-maker detection.
• Storage for up to 400 groups of NIBP list, 60 alarm events record recall.
• Built-in rechargeable lithium battery with 4 hours working capacity.
• Capture dynamic wave forms.
• Patient info input management function.

AQB12 Multi Parameter Patient Monitor is a robust patient monitor, small enough to movearound, yet flexible enough to adapt to your particular needs. With a variety of optional extras, including arrhythmia and ST analysis, EtCO2 measurement and double IBP, AQUA 12 multi-parameter patient monitor is configurable to suit your requirements. Purchase only the advanced features that you need and nothing more. With NIBP recall and extensive data storage capability, AQUA 12 multi-parameter patient monitor is particularly well-suited for use in peri-anesthesia and critical care environments. Rich in functions, conveniently adaptable and pleasingly affordable, AQUA 12 multi-parameter patient monitor may be just the monitor for your department.
Features:

• 12.1 inch. high resolution color TFT LCD Screen.
• Thinner and lighter design, convenient and portable for user.
• Freeze instant waveform for real time S-T segment analysis, pace-maker detection.
• Full touch screen selectable, more convenient for operation.
• Real time S-T segment analysis, pace-maker detection.
• 3-level audio/visual alarming.
• Efficient resistance to interference of defibrillator and HF knife.
• Lasting working capacity with built-in rechargeable lithium battery.
• 400 proups of NIBP list, 6000 seconds ECG waveform recall. 60 alarm events record recall,
• 7-day trend chart in strorage.
• Wire/wireless central monitoring system applicable to ICU/CCU/OR

AQ12 Multi Parameter Patient Monitor is a robust patient monitor, small enough to move around, yet flexible enough to adapt to your particular needs. With a variety of optional extras, including arrhythmia and ST analysis, EtCO2 measurement and double IBP, AQUA 12 multi- parameter patient monitor is configurable to suit your requirements. Purchase only the advanced features that you need and nothing more. With NIBP recall and extensive data storage capability, AQUA 12 multi-parameter patient monitor is particularly well-suited for use in peri-anesthesia and critical care environments. Rich in functions, conveniently adaptable and pleasingly affordable, AQUA 12 multi-parameter patient monitor may be just the monitor for your department.
Features:

• 12.1 inch. high resolution color TFT LCD Screen.
• Thinner and lighter design, convenient and portable for user.
• Freeze instant waveform for real time S-T segment analysis, pace-maker detection.
• Full touch screen selectable, more convenient for operation.
• Real time S-T segment analysis, pace-maker detection.
• 3-level audio/visual alarming.
• Efficient resistance to interference of defibrillator and HF knife.
• Lasting working capacity with built-in rechargeable lithium battery.
• 400 groups of NIBP list, 6000 seconds ECG waveform recall. 60 alarm events record recall,
• 7-day trend chart in strorage.
• Wire/wireless central monitoring system applicable to ICU/CCU/OR

Details:

• 7-inch high-resolution color TFT LCD display.
• Smaller, thinner and lighter in design, convenient and portable for users.
• Real-time S-T segment analysis, pacemaker detection.
• Various interfaces: standard screen, trend screen, oxy CRG screen, NIBP list screen, big front screen.
• 3-level audio/visual alarms.
• Efficient resistance to interference of defibrillator and HF knife.
• Up to 400 groups NIBP list, 6000seconds, ECG waveform recall, 60 alarm event records recall, 7-day trend chart in storage.
• Built-in rechargeable lithium battery, 2-hour working capability.
• Wireless central monitoring system applicable to ICU/CCU/OR

Core:

• Classic ARM9 main board based on embedded Linux
• Support storage of 720 hours trend table and graph review, 2 hours waveform review, 1000 groups NIBP review and 200 alarm events review

Body:

• 12.1inch high resolution LCD
• Support display max. 11 waveforms
• Support 7 channel ECG waveform display simultaneously   

Printer:

• Built-in high-speed 50mm thermal printer

Central System:

• Wired or wireless connection 
• Bed view Alarm
• Three-level acousto-optic alarm 
• Human voice

Alarm:

• Sensor-off alarm 
• Paper out alarm 
• Support alarm review 
• Support alarm pause

Linux OS:

• Support data export for EMR connectivity by USB
• Multi-display mode 
• NIBP self-test mode
• Support Data Export by USB 
• 13 types of Arrhythmia analysis and real-time S-T segment analysis and pacemaker detection
• Drug calculation and titration table 
• Hemodynamic calculation
• Multi-language display  

Details:

• Super ability in against electrosurgical interference. Neither in cutting nor in burning, ECG waveform and HR can be influenced, very short recovering time after defibrillation, especially suitable for use in emergency or operating room.
• Unique thoracic impedance & nasal tube double model respiration test method (when patient can not lie quietly, only nasal tube respiration can detect the right respiration waveform and respiration rate).
• 10.4’’ color TFT LCD screen, lightness and volume are adjustable independently.
• Streamlined outline design with sense of the times & foldable handle.
• Multi-language interface selection: English, Spanish, Portuguese, Polish, French, Chinese, Arabic, Russian, Italian, Turkish, etc.
• User-friendly and man-machine dialogue interface with pop-up menus, dialogue boxes, rotary mouse and etc.
• Low-power consumption design with standby mode, rechargeable high-energy built-in battery.
• Advanced digital technology, accurately measure SpO2 in low perfusion situation.
• Drug calculation, ST-segment detection, pace maker and arrhythmia analysis.
• Display format include OxyCRG diagram, 7-lead ECG waveform, big-font mode simultaneously ; can store 5 kinds of user-defined display format;
• Sound and light integrated alarm, Alarm parameters can be adjusted to upper or lower.
• Suitable for adults, pediatrics and neonates
• Applications in bedside and delivery monitoring; Widely used in patient room, emergency room, operation room, PACU, ICU, CCU, etc.
• WAN communication function to network with central monitoring system and make long-distance monitoring, diagnosis, maintenance and software upgrade possible.
• Printing of data, waveform, trend tables and trend diagram.
• Optional CO2 detection function.

Features:

• Measure instantaneous Cpanograph Concentration (Carbon Dioxide Concentration) respiration rate, end-tidal Capnograph Concentration, Inspiration Capnograph Concentration
• Standard Configuration:- Main Stream/Side stream Capnograph, SPO2 , PR
• Optional Configuration:- NIBP, SPO2, Thermal Printer

Details:

• 8" TFT color LCD, multi-language interface(Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
• Fanless design, quiet, energy-saving and clean, which reduces the possibility of cross-infection.
• All-round monitor for adult, pediatric and neonate.
• With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
• Waveform, parameter color and location can be set optionally.
• Operation mode: keys and buttons.
• Display up to 8-channel waveform on one screen.
• Display 7-lead ECG waveform on one screen, and with ECG step function.
• Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
• HRV analysis function.
• NIBP measurement mode: Manual/AUTO/STAT, storage for 4800-group NIBP data.
• Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
• Drug concentration calculation and titration table functions.
• Print trend table data with one-key.
• Connect to Central Monitoring System by 3G, WiFi or wired mode.
• AC/DC, built-in rechargeable lithium battery achieve uninterrupted monitoring.
• Anti-high frequency surgical unit, defibrillation-proof{special leads are necessary).

Features:

• The choice of 12.1” LED color display provides superior flexibility for different clinical applications
• Accurate monitoring of ECG, SPO2, NIBP, TEMP, RESP, HR, PR and optional IBP, EtCo2
• Pacemaker detection, Electrosurgical interference proof
• Defibrillation protection and defibrillation synchronization
• OxyCRG available to judge the respiration and circular function for neonates
• 120 hours graphic and tabular trends of all parameters
• USB ports and SD card slot to ensure data storage/function upgrades
• Select from either Sidestream, or Mainstream EtCO2 technology to obtain fast, simple, and accurate CO2 results
• Nurse call function and Bi-directional communication with Central

Display:

• Various working interface selectable: Standard Monitoring Display, Large Font Intensive Care Display, Trend Graph/ Monitoring Co-Display, Bed to Bed view Display (optional), OxyCRG Dynamic View Display, Drug Dose Calculation Interface
• Sweep Speed: 6.25mm/s, 12.5mm/s, 25mm/s, 50mm/s

ECG:

• Lead Mode: 3 Leads (R, L, F or RA, LA, LL), 5 Leads (R, L, F, N, C or RA, LA, LL, RL, V)
• Waveform: 7 waveforms display on a screen
• 4 selectable plus: 0.25, 0.5, 1, 2 cm/mV
• PACE detection Detection leads: 7 selectable leads: I, II, III, AVR, AVL, AVF, V
• Defibrillation energy distributary Input voltage range ±8mV, polarized voltage: ±500mV
• CMRR Diagnosis: >100 dB (no 50Hz/60Hz software wave trap)
• Monitor: >110 dB (has 50Hz/60Hz software wave trap)
• Surgery: >100dB (50Hz/60Hz software wave trap)
• System noise: <30μV p-p (RTI)
• HR Measuring and Alarm Range
• Adult/Ped: 15 bpm – 300bpm
• Neo: 15 bpm – 350bpm
• Accuracy: ±1% or ±1bpm, which great
• Resolution: 1 bpm
• Sensitivity: > 200 μV P-P
• Differential Input Impedance: ≥ 5 MΩ
• Electrode offset potential: 300mVd.c. – 600mVd.c.
• Patient leakage current: < 10 uA
• ECG Signal Range: 6 mV (Vp-p).
• ST Segment Monitoring Range Measure and Alarm: -2.0 – +2.0 mV

Respiration:

• Method: Impedance between R-F (RA-LL), R-L (RA-LA)

Respiration Rate Measuring and Alarm Range:

• Adult: 0 rpm – 120 rpm Neo/Ped 0 rpm – 150 rpm
• Resolution: 1 rpm Accuracy 2 rpm
• Gain Selection: 0.25, 0.5, 1, 2, 3, 4, 5

IBP:

• Channel: Upto 4 channel
• Label: ART, PA, CVP, RAP, LAP, ICP, P1, P2
• Static Pressure Measuring Range: (-)50 – +300 mmHg (up to 350 mmHg)
• Static Pressure Accuracy: ±2% or ±1 mmHg whichever is higher
• Dynamical Pressure Measuring Range: (-)50 – +300 mmHg
• Dynamical Pressure Accuracy: 2 % or 1mmHg which bigger
• ART: 0 – 300 (mmHg) PA 6 – 120 (mmHg)
• CVP/RAP/LAP/ICP: (-)10 – 40 (mmHg) P1/P2 (-)50 – 300 (mmHg)
• Resolution: 1 (mmHg) Zero range 200 mmHg

CMS9200 can monitor such parameters as ECG, RESP, NIBP, SpO2, PR, Dual- channel TEMP, dual-channel IBP and EtCO2. It integrates parameter measurement module, display and recorder in one device to form a compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving. This equipment adopts full-isolation(floating), ECG defibrillation-proof protection, ECG anti-high frequency interference and NIBP dual- protection for over-pressure, to ensure monitoring quality and reduce operation risk, which is applicable for monitoring adult, pediatric and neonate.
Features:

• Elegant appearance, clear marks, standard interface, oxygen graph, trend graph, big characters, other BED observation, which are convenient for users.
• Standard parameters: ECG, RESP, NIBP, SpO2 and dual-channel TEMP. IBP, CO2 and built-in printer are optional.
• Fifteen languages are optional, and all operations can be finished by keys and buttons.
• 15" color LCD displays patient parameter and waveform collected, and alarm, bed NO., clock, equipment state and other information provided by the monitor synchronously.
• Monitoring parameters, scan speed, volume and output contents can be set optionally.
• Storage of 480-hour trend data, and review of 34-second holographic waveform.
• Adopt digital SpO2 technology, strong in anti-interference and anti-weak filling capability.
• Calculation of drug concentration.
• Built-in rechargeable battery for uninterrupted monitoring.
• PrintECG, SpO2, RESP, BP and TEMP data with one-key.
• Anti-high frequency surgical unit, defibrillation-proof(requirement for special leads).
• Optional functions: Moving bracket, hanging bracket, VGA output and and 12-lead.

We are engaged in offering Multipara Patient 5 Para Monitor to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Pre Para Patient Monitor to our clients. Our range of all products is widely appreciated by our clients.

YK-8000A multi-parameter patient monitor is our newest product. The display is 7 inch high resolution color TFT. It is equipped with 4 parameters including ECG, NIBP, SpO2, RESP. These four parameters can be flexible. You can choose different combinations as you need. This monitor is built-in rechargeable lithium battery. The working capacity is 5 hours. IBP is optional.

Features & Benefits:

• 4 Standard parameters: ECG, NIBP, SpO2, RESP.
• 7 inch high resolution color TFT LCD display.
• Real time S-T segment analysis, pace-maker detection.
• Indication of Incorrect manipulation and malfunction analysis.
• Patient info input management function
• Multi-lead ECG waveforms display in phase.
• Large volume of tabular and graphic trends information storage and easy to recall.
• Capture dynamic waveforms
• Efficient resistance to interference of defibrillator and HF knife.
• UP to 4 hours working capacity of built-in rechargeable lithium battery.
• Unique accessory management cabinet
• Networking capacity
• Option: IBP

Multi Parameter Patient Monitor is provided by us, is mainly designed to provide multiple information related to patient conditions. This monitor measures, records, distributes and displays combinations of biometric values such as heart rate, SPO2, blood pressure, temperature and more. This monitor is widely used for monitoring the patients and providing proper information. Multiple Parameter Monitor acts as an electronic medical device that consists of one of more monitoring sensors, a processing component, and a screen display. This monitor provides and records a patient's medical vital signs or measurements of the activity of various body organs. This monitor can be easily availed by our customers at cheaper rates. 

• 12.1 INCH SCREEN
• ECG, NIBP, SPO2, TEMP, RESP, PR
• ETCO2, CO, IBP, RECORDER OPTIONAL

 

Specifications:

• Large 12`1 color TFT display for distant and wide angle visibility.
• 6 channel display of ECG, SpO2 AND respiration waveform standard parameters of ECG, SpO2, NIBP, Temp.Respiration and pulse rate
• Optional parameters of CO2 and IBP Graphical and Tabular trends for 12/24/96 hours. Adult/pediatric/neonatal measuring modes visual and audible alarm
• 6 Parameters, 12.1 inch screen Touch Screen (ECG, SpO2, NIBP, RESPIRATION, TEMP, PR)

Sony Medical continues to deliver innovation across medical imaging, including the first OLED medical monitor and leading HD 3D technology. Our range of specialist equipment includes everything from medical printers, radiology imagers and print media to cameras, monitors and recorders

The LMD -1530MD to LMD-4251TD inherits the proven technology and features of the widely respected 2D LCD monitor, the high grade LMD-1530MD to LMD-4250W. The LMD-4251TD can also display 2D pictures.

Key features of this monitor are Sony's highly acclaimed, unique ChromaTRU colour matching technology and a Full-HD (1920 x 1080) resolution professional LCD panel with an excellent wide viewing angle. Full digital 10-bit processing adds to the already impressive array of specifications, delivering smooth greyscale and colour transitions.

The LMD-4251TD can accept various source of 3D signal format such as 3D on 3G, Dual stream left and right, Field sequential and side-by-side HD-SDI as well as DVI-D line interleave (line by line) mode. A new set of 3D features have also been added to the monitor to help the user to manage the 3D effects with efficiency. The BKM-250TG board is required to display these features.

Entirely at home in broadcast, OB, production, post-production and corporate environments, the LMD-4251TD accepts a wide variety of PC and analogue video formats and optional decoder boards are available for Standard and High Definition digital video display.

High-performance Picture Quality:

• The LMD-4251TD incorporates a Full-HD (1920x1080) LCD panel to provide Full HD resolution images. It is equipped with a high purity colour filters to provide precise colours.

Stress-free 3D Monitoring: The LMD-4251TD incorporates a micro-polarizer filter attached to the LCD panel, and is supplied with circular-polarizer 3D Sony glasses. Wearing these lightweight 3D glasses, users can enjoy smooth, uninterrupted viewing of multiple monitors and flicker-free 3D images. This image quality helps users to engage in 3D production operations with minimal stress.
Convenient 2D/3D Display functions: There are a variety of convenient 3D production features– ideal for high-quality creative 3D production. These features are assignable to the function keys on the front panel of the LMD-4251TD, and can also be assigned to an external remote control unit. Channel 2D/3D mode can be selected from a function key for user convenience during 3D production work.

Dual 2D/3D functionality maximises ROI: This model not only excels in 3D, but is equipped with the consistent quality, functionality, and operability – essential for a 2D professional monitors. In fact, its features are fully compatible with those of current LMD-51W Series monitors.
Colour Quality Decisions can be made with Confidence: Enhanced colour gamut and innovative Sony ChromaTRU technology ensure consistent and repeatable colour to ITU-709, SMPTE and EBU standards and from monitor to monitor.
Perfect for Group Viewing: Sony 3D monitors have been optimised to provide a very wide viewing angle for group viewing.
Lifelike picture quality: Ideal for BROADCAST (studio, office viewing, control room etc.), PRODUCTION (OB, monitor wall, VTR control, audio monitoring etc.), POST-PRODUCTION (mid-range multi-format editing consoles), CORPORATE (high-end multi-format use) and GRAPHIC DESIGN
Exceptionally Versatile: Equally suited to AV or IT-based applications due to a broad range of inputs and multi-format signal capabilities.

Future Proof: Multi-format and HD capability plus optional decoder boards will ensure that the LMD-4251TD remains current.

Indoor or Outdoor Operation: Can be powered by AC or DC power supplies.

Specifications:

• Large 12`1” color TFT display for distant and wide angle visibility.
• 6 channel display of ECG, SpO2 AND respiration waveform
• Standard parameters of ECG, SpO2, NIBP, Temp. Respiration and pulse rate
• Optional parameters of CO2 and IBP
• Graphical and Tabular trends for 12/24/96 hours.
• Adult/pediatric/neonatal measuring modes, visual and audible alarm
• 6 Parameters, 12.1 inch screen Touch Screen (ECG, SpO2, NIBP, RESPIRATION, TEMP, PR)  

      Options:

• Touchscreen, ETCO2, IBP-2 Channel 

 

Specifications:

• Large 12`1” color TFT display for distant and wide angle visibility.
• 6 channel display of ECG, SpO2 AND respiration waveform
• standard parameters of ECG, SpO2, NIBP, Temp. Respiration and pulse rate
• Optional parameters of CO2 and IBP
• Graphical and Tabular trends for 12/24/96 hours.
• Adult/pediatric/neonatal measuring modes, visual and audible alarm
• 6 Parameters, 12.1 inch screen Touch Screen (ECG, SpO2, NIBP, RESPIRATION, TEMP, PR)        

Optional:

• Touchscreen, ETCO2, IBP-2 CHANNEL 

Details:

• Suitable for adult, pediatric and neonatal patient.
• 2.8" High brightness TFT LCD Display.
• High brightness LED Display of NIBP, SpO2 and pulse rate.
• Memory: Built in Flash Memory.
• Audio volume adjustable.
• Built in rechargable Li-Polymer.

We are engaged in offering Contec CMS 8000 Multipara Patient Monitor to our clients. Our range of all products is widely appreciated by our clients.

Details:

• 7" Colur TFT Display, led backlight , 800x600 pixels.
• Operating Mode Selection: Neonatal/Pediatric/Adult.
• Visual and Audio alarms, adjustable.
• Patient management, name and age and id.
• Network with Central Station Software,
• Built-in removable and rechargeable lithium battery, easy operating UI with both Keypad menu.
• Powerful data storage and managment, Trend graph, Trend table, etc
• Arrythmia analysis and S-T segment analysis.

Features:

• 8" large high resolution colour TFT display
• Large volume of tabular and graphic trends information storage and easy to recall
• Upto 4 hours working capacity with builtin rechargeable battery
• Networking capability
• Suitable for adult, paediatric and neonate patients

We are engaged in offering Portable Defibrillator Monitor to our clients. Our range of all products is widely appreciated by our clients.